5 Reasons Why After Using Computer We Must Passing Phase Shut Down
Every time we use a computer, after we shall do the shutdown process. however, usually some users sometimes like lazy shutdown pending a rather long time, so get on with it turned off from the power button or from the outlet. Well for those who've done it are advised to read this discussion. If we are too often shut down the computer by turning off the electrical connection to the computer without shutdown process, there are several obstacles that will happen:
1. During the process of re-registering the computer will shutdown the computer components in use (used) and the software and data used or that the delete.
If we turn off the computer directly, then the component or software and data used can not be saved into the registry, so if there is a problem on a computer, the computer can not run a system recovery based on the date or time on the set.
2. At the time of the shutdown, the processor gives orders to the bios to stop all the jobs component of the equipment, so that current or power is disconnected normally unused.
But if we turn off the computer component directly sudden death without breaking the normal flow so that over time will cause damage to computer components.
3. At the time of the shutdown the computer fan will work two times faster for the processor cooling process, if we turn off the computer directly, then the processor cooling is not working normally then over time the processor can be damaged.
4. At the time of the shutdown system memory will be emptied, so that when the computer is used again then the memory is really in a state refresh, if we turn off the computer directly it is possible that the memory can be corrupted.
5. At the time of the shutdown works hard disk for storing data ordered processor and copy the data into the registration software components as well as the computer, the hard disk will then head back to the starting position (the position does not read the hard disk).
If we turn off the computer directly in addition to the data and software components are not stored in the registry, as well as the position of the hard disk head is in the middle of the cylinder hard disk, so that when the computer is turned on can damage the cylinder, causing the hard disk bad sectors hard disk, the old over time will cause the hard disk is damaged.
That's why when the computer Shutdown long to die. Therefore, if you should turn off your computer must process shutdown first, if we do not want any damage to computer system problems, both its software and hardware.
"5 Reasons Why After Using Computer We Must Passing Phase Shut Down. If we turn off the computer directly in addition to the data and software components are not stored in the registry, as well as the position of the hard disk head is in the middle of the cylinder hard disk, so that when the computer is turned on can damage the cylinder, causing the hard disk bad sectors hard disk, the old over time will cause the hard disk is damaged"
Every time we use a computer, after we shall do the shutdown process. however, usually some users sometimes like lazy shutdown pending a rather long time, so get on with it turned off from the power button or from the outlet. Well for those who've done it are advised to read this discussion. If we are too often shut down the computer by turning off the electrical connection to the computer without shutdown process, there are several obstacles that will happen:1. During the process of re-registering the computer will shutdown the computer components in use (used) and the software and data used or that the delete.
If we turn off the computer directly, then the component or software and data used can not be saved into the registry, so if there is a problem on a computer, the computer can not run a system recovery based on the date or time on the set.
2. At the time of the shutdown, the processor gives orders to the bios to stop all the jobs component of the equipment, so that current or power is disconnected normally unused.
But if we turn off the computer component directly sudden death without breaking the normal flow so that over time will cause damage to computer components.
3. At the time of the shutdown the computer fan will work two times faster for the processor cooling process, if we turn off the computer directly, then the processor cooling is not working normally then over time the processor can be damaged.
4. At the time of the shutdown system memory will be emptied, so that when the computer is used again then the memory is really in a state refresh, if we turn off the computer directly it is possible that the memory can be corrupted.
5. At the time of the shutdown works hard disk for storing data ordered processor and copy the data into the registration software components as well as the computer, the hard disk will then head back to the starting position (the position does not read the hard disk).
If we turn off the computer directly in addition to the data and software components are not stored in the registry, as well as the position of the hard disk head is in the middle of the cylinder hard disk, so that when the computer is turned on can damage the cylinder, causing the hard disk bad sectors hard disk, the old over time will cause the hard disk is damaged.
That's why when the computer Shutdown long to die. Therefore, if you should turn off your computer must process shutdown first, if we do not want any damage to computer system problems, both its software and hardware.
"5 Reasons Why After Using Computer We Must Passing Phase Shut Down. If we turn off the computer directly in addition to the data and software components are not stored in the registry, as well as the position of the hard disk head is in the middle of the cylinder hard disk, so that when the computer is turned on can damage the cylinder, causing the hard disk bad sectors hard disk, the old over time will cause the hard disk is damaged"
Tidak ada komentar:
Posting Komentar